Masterlift 2.35 Combi Check-in KA 1550
Electro-hydraulic 2xtwin-ram lift, 3.5 t, with platforms and free-wheel lift with flat lifting supports
Benefits
Platform structure ML Combi-Check-in
Very low platform construction with all-round aluminium planking and LED lighting, reliable automatic wheel stops and low drive-on angle, perfect for sports cars.
Pv Superstructure
Particularly stable repair platforms made of welded profile, alternatively made of solid material, available in various lengths with longitudinally adjustable supports and optionally with xy-slider.
Hydraulic pump unit with immersed motor for inground lifts
High-quality hydraulic pump unit with immersed motor, low power consumption, efficient oil filtration and pneumatic emergency drain as standard.
Inversed cylinder - for all inground lifts
Hard-chrome plated inversed cylinder with precisely fitting piston guidance via sliding bands, small amount of environmentally friendly hydraulic fluid, almost maintenance-free.
Strong guide bearing
Strong, corrosion-free aluminium bearings for a permanently attractive appearance, in optimum overall height for maximum stability.
Optimal connection
Smooth and perfectly synchronised lifting and lowering via devided, flexibly mounted synchronised bearing, completely maintenance- and wear-free.
Steel cassette
Liquid-tight steel cassette with tightness certificate in many versions for special installation situations; pre-fitting of the lifting unit ex works as optional extra.
Programmable push button control unit - for all inground lifts
Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.
Description
Steel cassette:
- Waterproof steel cassette (WHG)
Hydraulic unit:
- Hard-chrome plated cylinder
- Flexible synchronization and safety system
- Corrosion-free guiding elements
- Hydraulic pump unit with immersed motor
- Ecological hydraulic fluid
- Pneumatic emergency lowering
- Programmable pushbutton control unit
Platforms:
- A set of platforms with drive-on ramps and stops; LED lighting set incl.
- Low drive-on angle (<8°), perfect for sports cars -
Free-wheel lift Pv:
- Stable lifting supports, lengthwise adjustable
- Low minimum height
- Rubber-coated, non-skid pads
Standard colours:
- Platforms: RAL 7016 and aluminium coated and integrated LED lightning
Pv Premium: zink coated and painted RAL 9006
Versions
Steel cassette:
- Hot galvanized
- Coated
Superstructure Pv:
- Lifting supports in different lengths (120-180, 140-200, 160-220 & 170-240)
Installation:
- Superstructure on floor
- Superstructure in floor
Options
- XY-pads
- Sets of rubber blocks, 40, 60, 80 and 100 mm
- Large program of extra pads
- Special colours available on request
Recommendations
| BMW / Mini |
| Volkswagen Group |
| Mercedes-Benz |
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,870 mm |
| Working height | P: 1,965 mm WF: 2,030 mm+ Rubber pads |
| Cylinder diametre | 4 x 140 mm |
| Distance between cylinders | 1,550 mm |
| Lifting / lowering time | ~ 30 sec. |
| Foundation depth | 2,625 mm |
| Pump unit | 3.0 kW |
| Hydraulic oil | 14 l |
| Voltage | 230/400 V / 50 Hz / 16 A |
Pv superstructure
| Total length, min. - max. | 120-180: ~ 1,200 - 1,800 mm 140-200: ~ 1,400 - 2,000 mm 160-220: ~ 1,600 - 2,200 mm 170-240: ~ 1,700 - 2,400 mm |
| Min. height | 65 mm |
Platforms
| Total length | 5,580 mm |
| Platform width - Measurements depend on platform length | 650 mm |
| Usable length of platform | 4,400 mm |
| Wheel base, min. - max. | ~ 3,900 mm |
| Distance between platforms | 900 mm |
| Drive-on height | 95 mm |