AUTOPSTENHOJ - STENHØJ A/S

AUTOPSTENHOJ

STENHØJ A/S
info@autopstenhoj.com
Barrit Langgade 188-190
DK- 7150 Barrit

AUTOPSTENHOJ - autop Maschinenbau GmbH

AUTOPSTENHOJ

autop Maschinenbau GmbH
info@autopstenhoj.com
Sandkampstr. 90
D-48432 Rheine

MagiX 35 DS

Electro-hydraulic double scissor lift, 3.5 t capacity

New MagiX 35 DS

Description

  • Double master / slave system, therefore no compressed air and no safety ratchet necessary
  • Self-locking parachute valves in cylinders against sudden increase of speed
  • Control column with push buttons, integrated pump unit and alarm signal
  • Electronic synchronization through photo sensor and reflector, stops lift from 50 mm difference in height
  • Emergency lowering valves can manually be opened
  • Sturdy scissor construction for high directional stability
  • Ramps made of tear plates, for easy drive-on, also with wet wheels
  • Base frame galvanized as standard
  • No mechanical connection between scissor sections, therefore free gangway
  • Lubrication free teflon sliding bearings in all joints
  • Optimum lifting area from small passenger car up to VW T6 short wheel base / BMW series 7 long (G12)
  • Low minimum height ≤ 100 mm, for perfect drive-over situation, also for flat vehicles
  • No fixed drive-on direction, lift is reversible, flexible positioning of control column. Recommended: front left side
  • Rubber blocks 1 set = 4 pcs, H=40 mm, as well as hose and calbe covers included in scope of delivery


Standard colours:
Platforms & scissor: RAL 7016 – grey
Ramps: RAL 3020 – red

Lifting capacity, up to 3,500 kg
Stroke length 1,900 mm
Working height 2,000 mm / 1,900 mm + Rubber pads
Lifting / lowering time ~ 40/38 sec.
Pump unit 2.2 kW
Voltage 3Ph - 230/400V - 50/60 Hz
Max. distance scissor – control column 2 m
Platform length 1,480 - 2,200 mm
Platform width 625 mm
Min. height ≤100 mm / 0 mm
Distance between platforms flexible, 900 mm (recommended)
Depth of recess 0 mm/105 mm

Versions

  • Available with different voltages
  • For surface-mounting or recession, with the same lift version
  • G = galvanized platforms

Options

  • Set of expansion bolts
  • LED-lighting set for surface-mounted installation
  • Installation frame galvanized, for recessed installation
  • Set rubber blocks, 20, 40, 60, 70, 80 and 100 mm
  • Hose extensions incl. covers (+ 2 meter)
  • Additional long drive-over ramps 1 set = 4 pcs, L=XXXX mm, for lowered cars
  • Cross bar for lifting 4x4 vehicles
  • Special colours available on request!