Maestro 32 M

Electro-mechanical 2-post lift, 3.2 t capacity

Posts:

Asymmetric post installation, vehicles can be positioned in rear area of work bay, for better door-opening angle
Very stable bent posts
Without base frame, therefore free drive-in situation
Two strong electric motors
Cold-rolled spindles for high durability
Nylon nut sets for high durability
Long carriage with optimized mounting of 8 sliding blocks for low friction
Carriage with threaded holes for easy adoption of diverse superstructures
Door-stop mounted on carriage
Obstruction system for stopping the lift when it hits an obstracle
Pushbutton control unit with alarm signal
Programmable limit switch for top stop and CE-stop
Electronic synchronization through comparison of pulses measured on the pulleys

Arms:

Universal lifting area from small passenger car up to BMW series 7 long G12
Open locking system
Possibility of parallel parking of arms for easier and faster positioning of vehicles
Arms can be opened more than 180° for better drive-in situation (+45°) for lifts installed in 90° angle to the drive lane
Low minimum height

Standard colours:
Carriage and arms: RAL 3020 – red
Posts: RAL 7016 – grey

Lifting pad included in the delivery	F: 11027: 100 - 140 mm
Total height post	3100 mm
Total height incl. portal	4,060 - 4,420 mm
Drive-through width	2,205 mm
Min. height	100 mm, 90 mm with extra lifting pad 29,265
Width between posts	2,565 mm
Arm length front, min. - max.	F DT: 640-1,175 mm
Arm length rear, min. - max.	F DT: 640-1,175 mm
Insertion height in swivel arm	F Std: 65 mm

Available with different portal heights, alternatively in-ground kit
Set of expansion bolts
LED-lighting set, flexible with spiral cable, fastening through magnets on posts or vehicle
Energy set with compressed air and socket-outlet
Extra control unit for second post
Large program of extra pads, depending on type of vehicle
Special colours available on request!