Emissionmaster SGA400 Combi
DP = Discontinued product - only spare parts available
Description
- Gas analyzer incl. Lambda
- With printer (thermal printer)
- 7m Hose and probe in stainless steel
- Power cable
- Aqua sense:
protects the optical bench from being damaged of liquids if those would enter the analyzer - Fast warum up time:
The warm up time is less than 10 seconds and full accuracy is reached wihtin 2 minutes of running - Optical IR bench:
Solid state detector, OIML calss 00 with latest technologies and highest accuracy available - Smoke analyzer for diesel vehicles
- Light absorption partial flow opaciemeter
- Vehicle test time is less than 3 minutes
- Two test programs included
- Automatic zeroing
- Linearity test
- Diesel smoke opacity is measured in smoke density % (also known as Hartridge HSU units) as well as in absorption coefficient k (m- 1).
The readings of the k and % opacity values are displayed simultaneously. - Upgrades:
New firmware can be downloaded via USB. Much quicker and more reliable than earlier proms - Measurement:
Both accuracy and resolution are improved comparing with precursor - Reliability: 12 months calibration interval
Versions
Stand-alone device for petrol, LPG and diesel vehicles (mobile stand with wheels optional)
Options
- OBD scanner
- Hand terminal with LCD dispay
- Calibration gas
- Mobile stand
- RPM sensor via battery sytsem or piezo electronic system with 6mm clamp
- Oil temp. Sensor
- Option NOx
Request for quotation
Technical data
| Warm up time | <10 sec |
| On-board voltage | 10-30 VDC (with transformer) |
| Power supply | 100-240 VAC, 50-60Hz |
| Dimensions (LxWx H) | 400mm x 240mm x 260mm |
| Weight | 5,3 Kg |
| Accuracy class | 0 (OIML) |
| Flow | min. 5,5 l/min, nominal 6,5 l/min |
| Measureable gases | CO, HC, CO2, O2 |
| CO - Measurement range / Measured value resolution | 0 - 10 % / 0,01 |
| CO2 - Measurement range / Measured value resolution | 0 - 20 % / 0,01 |
| HC - Measurement range / Measured value resolution | 0 - 15000 ppm / 1 |
| O2 - Measurement range / Measured value resolution | 0 - 25 % / 0,01 |
Emissionmaster SST100 for SGA400
| Warm up time | 3 min |
| Detector / light source | Silizium photodiode / green LED 565nm |
| Absorption coeeficient (range / resolution) | 0-16.06 m-1 / 0,01 m-1 |
| Optical path length | 215mm corrected to 430mm according to ISO 11614 |
| Measurement range turbidity (range / resolution) | 0-99,9% / 0,1% |