Testmaster TL40-L NxT
Roller Testlane for check-in, repair and maintenance, testing equipment, general inspection
Description
- Hot-dip galvanized , enclosed roller set
- Low wear rollers , 203 mm with welded surface
- Track width: 850 mm to 2550 mm
- Adjusting screws for height adjustment
- Wear-free , electronic measuring system DMS
- Sensing rollers 50mm
- Prepared for weighing device
- Modular system , all roller sets can be extended to test lane
- Compact electric / switchbox, prepared for upgrade
- Drive-over axle load 4,0 to
- Brake force 8 kN (optional 12 kN)
- Already equipped with a drive-off assistance
- Manual / Automatic mode
- Delayed switch on, start-up monitoring , slip switch-off and switch-off after exiting the test bed
- Testing program for electronic parking brakes
- Lockable main switch
- Suspension tester Boge system,hot-dip galvanized bottom group
- testing panelshot-dip galvanized
- Optional analog display, digital display or PC software
Versions
- Hot-dip galvanized roller set and suspension tester
- Roller set mit 203mm rollers with welded surface
- Electrical / switch box with motor protection , control electronics , lockable main switch, emergency stop switch , 12m precabling between bottom groups and e-box
Options
- Foundation frame
- Permanent formwork
- Plastic-coated rollers
- Pneumatic lowering/ lifting deviceler set raising
- Side slip tester
- Manually reversible rotation and measuring direction
- Automatically four wheel recognition (patented)
- EDOS (Easy drive out system - patented)
- Roller cover plate
- Remote control
- Digital display LED
- Pedal force meter
- Weighing device
- 5,5kW drive motors
- PC connection & ASA live stream
- Minicomputer ASA live stream
- PC software Display Office
Request for quotation
Technical data
| Drive over load | 4,000 kg |
| Brake force | 8 kN / 12 kN ( optional ) |
| Testing speed | 5 km/h |
| Drive power of motors | 2x 4.0 kW ( optional 2 x 5.5 kW ) |
| Roller diameter | 203 mm |
| Track width | 850 - 2,550 mm |
| Test load | at 50% braking 3,2 t / 4 t (optional) |
| Fuse | 3 x 25 A inert |
Suspension tester Testmaster TL 40
| Drive over load | 4,000 kg |
| Drive power of motors | 2 x 1.2 kW |
| Test load | 2.6 t |
| Fuse | 3 x 20 A inert |
| Power supply | 3 x 400 V, N, PE 50 Hz |
| Display (W x H x D) | 810x670x70 mm |
| Roller set (W x L x H) | 2,320x680x240 mm |
| Suspension tester (W x L x H) | 2.320x800x280 mm |