Testmaster RT 130-2
Roller brake tester for check-in, repair and maintenance, testing equipment, general inspection
Description
- 2 galvanized roller sets (split version) for suspended installation (mounting frame required for option weighing cells or for retrofit weighing cells)
- Motors with planetary gear units, enormous braking power
- 205 mm rollers with welded profile surface
- Roller length 1.000 mm, standard drive on height 40 mm over the drive off side
- Wear resistant and modern electronic strain gauge measuring system
- 50 mm rollers
- Prepared for weighing device
- Modular system , all roller sets can be extended with options
- Compact electric / switchbox, prepared for upgrade
- Drive-over axle load 13 to
- Brake force 32 kN
- Equipped as standard with drive-off system
- Manual / Automatic mode
- Delayed switch on, start-up monitoring
- Testing program for electronic parking brakes
- Lockable main switch
- Optionally with large easily read analogue display or with PC-connection kit and PC software
Versions
- Galvanised roller sets for hanging installation
- 205 mm rollers with welded surface, drive motors with 7,5 kW
- Electrical / switch box with motor protection , control electronics , lockable main switch , 20 m precabling
Options
- Analog brake force indicator with 2 x 400 mm watches
- LED digital display-D3
- PC software display, basic, test lane og office
- Graphic program and special programs for trucks
- PC connection via USB
- Installation frame for weighing device (also required if retro-fitted)
- Plastic coated rollers
- Extract for roller set
- Low voltage device
- Larger motors
- Reinforced roller set
- 2nd test speed
- Side slip tester, up to 15 t axle load
- Reversible rotation and measuring device
- Automatic 4-wheel detection (patented)
- Regulated 4-wheel drive
- EDOS (Easy drive-out system - patented)
- Roller cover plate
- Remote control
- Pedal force meter
- Weighing device
- Pressure sensors with options
- Pit safety device (Germany)
- Extended rollers for low-bed trailers 1500mm
Request for quotation
Technical data
| Drive over load | 13,000 kg |
| Brake force | 32 kN |
| Testing speed | 2.6 km/h |
| Drive power of motors | 2 x 7.5 kW |
| Roller diameter | 205 mm |
| Track width | 1,000 mm |
| Test load | at 50% braking 12,0 to |
| Fuse | 3 x 32 A inert |
| Power supply | 3 x 400 V, N, PE 50 Hz |
| Display (W x H x D) | 810 x 670 x 70 mm |
| Roller set (W x L x H) | 1,220 x 1,045 x 554 mm |