Maxi 4.160 & 4.200
Electro-mechanical 4-post lifts with 16 & 20 capacity
Description
- Obstruction system for stopping the lift when it hits an obstacle.
- Each post equipped with a motor and elastic coupling.
- Self-carrying spindles with carrying and safety nuts
- Electronic synchronization through comparison of pulses measured in the columns.
- Upper electronic limit switch.
- Lower mechanical limit switch.
- Push-button control unit with alarm signal.
- One movable platform as standard.
Standard colours:
Platforms & posts: grey RAL 7016
Ramps: red RAL 3020
Versions
- Available with different voltages
Maxi 4.160 & 4.200:
- 7500 mm flush platforms
- 8000 mm flush platforms
- 8500 mm flush platforms
- 9000 mm flush platforms
- 1260, 2000 or 2800 mm drive-on ramps
- Drive-on ramps and stops for surface-mounting; alternatively drive-over ramps for recessed installation
Options
- Set of expansion bolts
- Lighting set
- Auxiliary jack
- 3rd platform
Special colours available on request
Request for quotation
Technical data
| Lifting capacity, up to | 20,000 kg |
| Working height | 1,850 mm |
| Lifting / lowering time | 120 sec. |
| Operation | mechanical |
Maxi 4.160
| Lifting capacity, up to | 16,000 kg |
| Stroke length | 1,555 mm |
| Working height | 1,850 mm |
| Lifting / lowering time | 120 sec. |
| Voltage | 3x230/400V-50 Hz - 32 A |
| Motor | 4 x 2.2 kW |
| Operation | mechanical |
Maxi 4.200
| Lifting capacity, up to | 20,000 kg |
| Stroke length | 1,545 mm |
| Working height | 1,850 mm |
| Lifting / lowering time | 120 sec. |
| Voltage | 3x230/400V-50 Hz - 32 A |
| Motor | 4 x 2.2 kW |
| Operation | mechanical |
Micro 60-140
| Stroke length | 200 mm |
| Operation | air hydraulic |
| Necessary air pressure min. / max. | 8-12 bar |