Mascot 55 H
Electro-hydraulic 2-post lift, 5.5 t capacity
Description
Posts:
- Symmetric posts
- Very stable bent posts
- Without base frame
- Hydraulic pump unit
- Carriage with slide blocks
- Double door-stop
- Pushbutton control unit with alarm signal
- Adjustable end stop and upper protection bar
- Mechanic synchronization
- Electrical safety ratchet system (expensive compressed air not required)
Arms:
- Double telescopic front and rear arms
- Automatic arm locking system
- Low minimum height
- Suitable for passenger cars up to big vans and transporters
Standard colours:
- Arms: RAL 3020 – red
- Posts: RAL 7016 – grey
Options
- Set of expansion bolts
- Column extension
- Conversion kit for 2nd lowering speed
- Adaptor for AUTOPSTENHOJ pads
- A large program of lifting pads
- Base plate enlargement for unfavourable soil conditions
Special colours available on request!
Request for quotation
Technical data
| Lifting capacity, up to | 5,500 kg |
| Stroke length | 1,900 mm |
| Working height | 2,000 - 2,047 |
| Lifting / lowering time | ~ 50 sec. |
| Voltage | 3x230 / 400 V-50 / 60Hz – 16 A |
| Heating | 3 kW |
Arm superstructure
| Insertion height for lifting pad in the arm | 100 - 147 mm |
| Total height post | 4015 mm |
| Drive-through width | 2,784 mm |
| Min. height | 100 mm |
| Width between posts | 3,317 mm |
| Total width - outer edges base plates | 3,832 mm |
| Arm length front, min. - max. | 915 - 1,850 mm |
| Arm length rear, min. - max. | 915 - 1,850 mm |