Mascot 40 M II
Electro-mechanical 2-post lift, 4 t capacity
Description
- Posts:
- Asymmetric post installation
- Very stable, additionally reinforced bent posts
- Made of high quality 8 mm steel
- Without base frame, therefore free drive-in situation
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with optimized sliding block bearing for low friction
- Double door-stop mounted on carriage
- Push-button control unit with alarm signal
- Programmable top stop
- Electronic synchronization
Arms:
- Double telescopic arms
- Capsuled locking system "protected lock"
- Universal lifting area from small passenger car up to VW T6 long wheelbase
- Possibility of parallel parking of arms for easier and faster positioning of vehicles
- Arms can be opened more than 180° for better drive-in situation for lifts installed in 90° angle to the drive lane
- Low minimum height
Standard colours:
- Arms: red RAL 3020
- Posts: grey RAL 7016
Versions
- Available with different voltages
- Universal arm set for different cars
- DT = double telescopic arms
Options
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- A large program of lifting pads and adapters
- Suitable for AUTOPSTENHOJ wheel supports
- Base plate enlargement for unfavourable soil conditions
Special colours available on request!
Request for quotation
Technical data
| Lifting capacity, up to | 4,000 kg |
| Stroke length | 1,900 mm |
| Working height | 1,995-2,074 mm |
| Lifting / lowering time | ~ 40 sec. |
| Voltage | 3x400V-50Hz-16A |
| Motor | 2 x 2.8 kW |
Arm superstructure
| Lifting pad included in the delivery | F: 95 - 174 mm |
| Total height post | 2980 mm mm |
| Total height incl. portal | 4,237-4,597 mm |
| Drive-through width | 2,407 mm |
| Min. height | 95 mm |
| Width between posts | 2,753 mm |
| Total width - outer edges base plates | 3,500 mm |
| Arm length front, min. - max. | F: 605-1,255 mm |
| Arm length rear, min. - max. | F: 740-1,455 mm |
| Insertion height in swivel arm | 55 mm |