Mascot 40 H

Electro-hydraulic 2-post lift with 4.0 t capacity

Sketches
Brochure
Quotation
Callback

Description

Posts:

  • Asymmetric post installation, vehicles can be positioned far to the rear, for better door-opening angle
  • Very stable bent posts
  • Without base frame, therefore free drive-in situation
  • One power pack with low power consumption
  • Carriage with optimized sliding block bearing for low friction
  • Double door-stop mounted on carriage
  • Electrically operated safety ratchet system, no expensive compressed air required
  • Pushbutton control unit with parking button and alarm signal
  • Adjustable limit switch for top stop and CE-stop, as well as upper protection switch rail
  • Mechanic synchronization via steel cables
  • Post is height adjustable during installation

Arms:

  • Universal lifting area from small passenger car up to VW T6 long wheel base with lifting pad type „F“
  • Possibility of parallel parking of arms for easier and faster positioning of vehicles
  • Arms can be opened more than 180° for better drive-in situation for lifts installed in 90° angle to the drive lane
  • Low minimum height

Standard colours:

  • Carriage and arms: RAL 3020 – red
  • Posts: RAL 7016 – grey

Versions

  • Available with different voltages
  • Universal arm set for different cars
  • DT = double telescopic arms

Options

  • Set of expansion bolts
  • Column extension
  • Conversion kit for 2nd lowering speed
  • Adaptor for AUTOPSTENHOJ pads
  • A large program of lifting pads
  • Base plate enlargement for unfavourable soil conditions

    Special colours available on request!
Request for quotation

Recommendations

Volvo

Technical data

Lifting capacity, up to 4,000 kg
Stroke length 1,900 mm
Working height 1,990-2,066 mm
Lifting / lowering time ~ 30 sec.
Voltage 3x230/400V-50/60Hz-16A
Motor 3.0 kW

Arm superstructure

Lifting pad included in the delivery F: 90 - 166 mm
Total height post 3995 + 225 mm
Drive-through width 2,405 mm
Min. height 90 mm
Width between posts 2,740 mm
Total width - outer edges base plates 3,500 mm
Arm length front, min. - max. F: 600-1,245 mm
Arm length rear, min. - max. F: 750-1,445 mm