Major 5230

Electro-hydraulic 4-post lift with 5.2 t capacity

Description

Integrated eccentric brake system
Emergency stop valve
Obstruction system
Pneumatic parking system in height adjustable ratchets
Pump unit with immersed motor and control unit on rear left post
Pushbutton control unit with alarm signal
Hydraulic cylinder under left platform
Lifting and lowering by means of cables
Emergency lowering valve
One movable platform as standard
Platforms prepared for AUTOPSTENHOJ scissor jack

Standard colours:

Platforms & posts: grey RAL 7016, ramps: red RAL 3020

Request for quotation

Recommendations:

Renault

Technical data

Lifting capacity, up to	5,200 kg
Stroke length	1,670 mm
Working height	1,860 mm
Lifting / lowering time	32 / 26 sec.
Pump unit	3.0 kW
Voltage	3x230/400V-50 Hz - 25/16 A

Platforms

Total length	5,560/ 5,980/ 6,780 mm
Platform width	630 mm
Usable length of platform	4,680/ 5,100/ 5,500 mm
Height	2,233 mm
Wheel base, min. - max.	variable
Distance between platforms	725 - 1,210 mm
Drive-on height	140/170/160/190 mm
Width between posts	3,000 mm
Total width - outer edges base plates	3,422 mm

Versions

Available with different voltages
S = flush platforms
WL = with front recesses for turn tables and rear side slip plates, center cover plate between recesses and side slip plates
G = galvanized platforms
42 = 4200 mm platforms
47 = 4700 mm platforms
51 = 5100 mm platforms
55 = 5500 mm platforms
Drive-on ramps and stops for surface-mounting, alternatively drive-over ramps for recessed installation

Inspection lifts:
As standard equipped with re-inforced posts and larger cable diameter for intensive usage in inspection centres. As standard delivered with:
P = play detector (pneumatically operated for both lateral and rotational movement, for axle load up to 3 t), operation with wireless hand lamp
Option:
D = double pump unit for quicker lifting time. Control unit on front left post

MOT / ATL lifts:
Worldwide accepted inspection lifts which have been specified and constructed according to UK MOT and ATL (automated test lanes VOSA) requirements.
Both MOT / ATL lifts are as standard delivered with front recesses with turntables and extra control unit for operation from front right post; ATL lifts furthermore equipped with re-inforced posts and larger cable diameter and:
P = play detector (pneumatically operated for both lateral and rotational movement, for axle load up to 3 t), operation with wireless hand lamp

Options

Set of expansion bolts
Extra control unit
LED lighting set
Set of two cover plates for recesses
Set of two 385 mm ramp extensions
Set of two platform extensions (0.5 m)
Special colours available on request

AUTOPSTENHOJ