Major 4030
Electro-hydraulic 4-post lift with 4 t capacity
Description
- Integrated eccentric brake system
- Emergency stop valve
- Obstruction system
- Pneumatic parking system in height adjustable ratchets
- Pump unit with immersed motor and control unit on rear left post
- Pushbutton control unit with alarm signal
- Hydraulic cylinder under left platform
- Lifting and lowering by means of cables
- Emergency lowering valve
- One movable platform as standard
- Platforms prepared for AUTOPSTENHOJ scissor jack
Standard colours:
Platforms & posts: grey RAL 7016, ramps: red RAL 3020
Versions
Available with different voltages
- S = flush platforms
- WL = with front recesses for turn tables and rear side slip plates, center cover plate between recesses and side slip plates
- G = galvanized platforms
- 42 = 4200 mm platforms
- 47 = 4700 mm platforms
- 51 = 5100 mm platforms
- Drive-on ramps and stops for surface-mounting, alternatively drive-over ramps for recessed installation
Inspection lifts:
As standard equipped with re-inforced posts and larger cable diameter for intensive usage in inspection centres. As standard delivered with:
P = play detector (pneumatically operated for both lateral and rotational movement, for axle load up to 3 t), operation with wireless hand lamp
Option:
D = double pump unit for quicker lifting time. Control unit on front left post
MOT / ATL lifts:
Worldwide accepted inspection lifts which have been specified and constructed according to UK MOT and ATL (automated test lanes VOSA) requirements.
Both MOT / ATL lifts are as standard delivered with front recesses with turntables and extra control unit for operation from front right post; ATL lifts furthermore equipped with re-inforced posts and larger cable diameter and:
P = play detector (pneumatically operated for both lateral and rotational movement, for axle load up to 3 t), operation with wireless hand lamp
Options
- Set of expansion bolts
- Extra control unit
- LED lighting set
- Set of two cover plates for recesses
- Set of two 385 mm ramp extensions
- Set of two platform extensions (0.5 m)
Special colours available on request
Recommendations
| Renault |
| Jaguar |
| Landrover |
Technical data
| Lifting capacity, up to | 4,000 kg |
| Stroke length | 1,670 mm |
| Working height | 1,830 mm |
| Lifting / lowering time | 24 / 26 sec. |
| Pump unit | 3.0 kW |
| Voltage | 3x230/400V-50 Hz - 25/16 A |
Platforms
| Total length | 5,560/ 5,980 mm |
| Platform width - Measurements depend on platform length | 550 mm |
| Usable length of platform | 4,680/ 5,100 mm |
| Height | 2,233 mm |
| Wheel base, min. - max. | variable |
| Distance between platforms | 805 - 1,285 mm |
| Drive-on height | 140/160 mm |
| Width between posts | 3,000 mm |
| Total width - outer edges base plates | 3,422 mm |
Major 4030 Inspection
| Lifting capacity, up to | 4,000 kg |
| Stroke length | 1,670 mm |
| Working height | 1,810 mm |
| Lifting / lowering time | Standard: 24/26 sec. D:16/26 sec. |
| Pump unit | Standard: 3 kW D: 2 x 3 kW |
| Voltage | 3x230/400V - 50 Hz - 25/16 A |