Major 2.0 4030
Electro-hydraulic 4-post lift, 4 t capacity
Description
Posts:
- Integrated eccentric brake system
- Emergency stop valve
- Obstruction system
- Pneumatic parking system in height adjustable ratchets
- Pump unit with immersed motor and control unit on front left post
- Pushbutton control unit with alarm signal
- Hydraulic cylinder under left platform
- Lifting and lowering by means of cables
- Emergency lowering valve
Platforms:
- One movable platform as standard
- Platforms prepared for AUTOPSTENHOJ scissor jack
Standard colours:
- Platforms & posts: RAL 7016 – grey
- Ramps: RAL 3020 – red
Versions
Available with different voltages
- Drive-on ramps and stops for surfacemounting,
- alternatively drive-over ramps for recessed installation
- S = flush platforms
- WL = with adjustable front recesses for turn tables and adjustable rear side slip plates supported by balls, center cover plate between recesses and side slip plates
- G = galvanized platforms
- 48 = 4,800 mm platforms
- 51 = 5,100 mm platforms
Options
- Set of expansion bolts
- Extra control unit
- LED-lighting set
- Set of two 385 mm ramp extensions
- Set of two platform extensions (0.5 m)
- Pneumatic lock cylinder kit for slip plates
Special colours available on request!
Request for quotation
Technical data
Lifting capacity, up to | 4,000 kg |
Stroke length | 1,670 mm |
Working height | 1,860 mm |
Lifting / lowering time | 24/26 sec. |
Pump unit | 3.0 kW |
Voltage | 3x230/400V-50 Hz - 25/16 A |
Platforms
Total length | 51: 5,983 mm |
Platform width - Measurements depend on platform length | 550 mm |
Usable length of platform | 51: 5,100 mm |
Total height | 2235 mm |
Wheel base, min. - max. | 51S: max. 4,600 mm51 WL: min. 2,100 mm, max 4,100 mm |
Distance between platforms | 805 - 1,285 mm |
Drive-on height | 190 mm |
Width between posts | 3,000 mm |
Total width - outer edges base plates | 3,432 mm |