Maestro 2.35 Sport
Electro-mechanical 2-post lift with 3.5 t capacity
Description
Also suitable for the safe lifting of electric vehicles
- Asymmetric post installation
- Very stable welded posts
- Without base frame
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with 6 guiding wheels and lubrication-free roller bearings
- Pushbutton control unit with alarm signal
- Programmable top stop
- Electronic synchronization
- Double telescopic front and rear arms, as standard
- Internal arm locking system
- Low minimum height
Standard colours:
- Arms: red RAL 3020 / posts: grey RAL 7016
Versions
- Available with different voltages
- F = flex pad
Options
- Available with 2 different portal heights; alternatively in-ground kit
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- Long door stops
- Wheel holders
- Set of 4 wheel forks (400 mm)
- A large program of U and flex pads
- Special colours available on request
Request for quotation
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,900 mm |
| Working height | 1,970 - 1,995 mm + 50 mm pad extensions |
| Lifting / lowering time | ~ 35 sec. |
| Voltage | 3x230/400 V-50Hz - 35/25A |
| Motor | 2 x 2.8 kW |
Arm superstructure
| Total height post | 2713 mm |
| Total height incl. portal | 4,350 mm |
| Drive-through width | 2,400 mm |
| Min. height | 70 mm |
| Width between posts | 2,700 mm |
| Total width - outer edges base plates | 3,500 mm |
| Total width - outer edges posts | 3,242 mm |
| Arm length, min. - max. | 707 - 1,443 mm |
Maestro 2.35
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,900 mm |
| Working height | 1,995 - 2,150 mm |
| Lifting / lowering time | ~ 35 sec. |
| Voltage | 3x230/400 V-50Hz - 35/25A |
| Motor | 2 x 2.8 kW |