Maestro 2.35 Premium

Electro-mechanical 2-post lift with 3.5 t capacity
Suitable for the safe lifting of electric vehicles

New Suitable for E-Cars Maestro 2.35 Premium

Description

Maestro 2.35 Premium - Suitable for the safe lifting of electric vehicles

Posts:

  • Asymmetric post installation, vehicles can be positioned in rear area of work bay, for better door-opening angle
  • Very stable welded posts
  • Without base frame, therefore free drive-in situation
  • Two strong electric motors
  • Cold-rolled spindles for high durability
  • Nylon nut sets for high durability
  • Carriage with 6 guiding wheels and lubrication-free roller bearings, for very low friction
  • Door-stop mounted on carriage
  • Obstruction system for stopping the lift when it hits an obstracle
  • Pushbutton control unit with alarm signal
  • Programmable limit switch for top stop and CE-stop
  • Electronic synchronization through comparison of pulses on both columns

Arms:

  • Arms DT/ST: Universal lifting area from small passenger car up to VW T6 long wheel base with lifting pad type "F"
  • Arms DT/DT: Universal lifting area from small passenger car up to BMW 7 series long (G12) with lifting pad type "F"
  • Possibility of parallel parking of arms for easier and faster positioning of vehicles
  • Arms can be opened more than 180° for better drive-in situation (+45°) for lifts installed in 90° angle to the drive lane
  • Internal arm locking system, protected against moisture and dirt, with strong 360° interlocking
  • Low minimum height

Standard colours:
Carriage and arms: RAL 3020 – red
Posts: RAL 7016 – grey

Lifting capacity, up to 3,500 kg
Stroke length 1,900 mm
Working height 1,970-2,035 mm
+ 65 mm pad extension
Lifting / lowering time ~ 35 sec.
Voltage 3 x 230 / 400V – 50 Hz – 20 A
Motor 2 x 2.8 kW
Insertion height for lifting pad in the arm F Premium: 44 mm
Lifting pad included in the delivery F:29265 (26-51 mm)
Total height post 2713 mm
Total height incl. portal 3,990-4,350 mm
Drive-through width 2,466 mm
Min. height 70 mm + 65 mm pad extension
Width between posts 2,759 mm
Total width - outer edges base plates 3,500
Arm length front, min. - max. F Premium DT: 555 - 1,100 mm

Versions

  • Available with different voltages
  • F = flex pad
  • CF** = combiflex pad
  • CF-08** = combiflex-08 pad
  • DT/ST = double telescopic short arms in front / single telescopic long arms in rear
  • DT/DT* = double telescopic short arms in front and rear

* This variant will be available later
** These variants will be available later

Options

  • Available with different portal heights, alternatively inground kit
  • Set of expansion bolts
  • LED-lighting set
  • Energy set with compressed air and socket-outlet
  • Extra control unit for second column
  • Wheel supports
  • Large program of extra pads, depending on type of vehicle


Special colours available on request!