Maestro 2.30
DP = Discontinued product - only spare parts available
Description
- Asymmetric post installation
- Very stable welded posts
- Without base frame
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with 6 guiding wheels, 4 with lubrication-free roller bearings, 2 POM guiding wheels
- Pushbutton control unit with alarm signal
- Programmable top stop
- Electronic synchronization
- Single telescopic front and rear arms, as standard
- Possibility of parallel parking of arms
- Internal arm locking system
- Low minimum height
Standard colours:
Arms: red RAL 3020 / posts: grey RAL 7016
Versions
- Available with different voltages
- F = flex pad
- CF = combiflex pad
Options
- Available with portal height of 4,050 mm
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- Long door stops
- Wheel holders
- A large program of U and flex pads
Special colours available on request
Request for quotation
Technical data
| Lifting capacity, up to | 3,000 kg |
| Stroke length | 1,900 mm |
| Working height | 1,995-2,025 mm |
| Lifting / lowering time | ~ 40 sec. |
| Voltage | 3x230/400V - 50 Hz -35/25A |
| Motor | 2 x 1.5 kW |
Arm superstructure
| Lifting pad included in the delivery | F: 777395 (25 - 55 mm) CF: 777539 (25 - 190 mm) |
| Total height post | 2690 mm |
| Total height incl. portal | 4,050 / 4,350 mm |
| Drive-through width | 2,120 - 2,320 mm |
| Min. height | 95 mm |
| Width between posts | 2,380 - 2,580 mm |
| Total width - outer edges base plates | 3,120 - 3,320 mm |
| Total width - outer edges posts | 2.960 - 3.160 mm |
| Arm length front, min. - max. | F Std: 540-850 mm F DT: 480-840 mm |
| Arm length rear, min. - max. | F Std1: 900-1,425 mm F Std2: 800-1,250 mm |