slide 1 to 5 of 15
Maestro 35 M
DP = Discontinued product - only spare parts available
Benefits
slide 1 to 3 of 9
The cold-rolled spindle
The cold-rolled spindle in combination with the nylon nut ensures maximum safety and long service life.
Strong internal arm locking system
Strong, internal swivel arm locking system protects against dirt and moisture and thus offers high functional safety.
Safety system
A safety system ensures that the lift stops automatically when lowered onto an obstacle.
Description
Also suitable for the safe lifting of electric vehicles
Posts:
- Asymmetric post installation, vehicles can be positioned in rear area of work bay, for better door-opening angle
- Very stable bent posts
- Without base frame, therefore free drive-in situation
- Two strong electric motors
- Cold-rolled spindles for high durability
- Nylon nut sets for high durability
- Long carriage with optimized mounting of 8 sliding blocks for low friction
- Carriage with threaded holes for easy adoption of diverse superstructures
- Door-stop mounted on carriage
- Obstruction system for stopping the lift when it hits an obstracle
- Pushbutton control unit with alarm signal
- Programmable limit switch for top stop and CE-stop
- Electronic synchronization through comparison of pulses measured on the pulleys
Arms:
- Universal lifting area from small passenger car up to VW T6 long wheel base with lifting pad type "F"
- Possibility of parallel parking of arms for easier and faster positioning of vehicles
- Arms can be opened more than 180° for better drive-in situation (+45°) for lifts installed in 90° angle to the drive lane
- Low minimum height
Standard colours:
Carriage and arms: RAL 3020 – red
Posts: RAL 7016 – grey
Versions
- Available with different voltages
- Premium arm set with special flat profile for sports cars
- F = flex pad
- CF-08 = combiflex-08 pad
- DT/- = double telescopic short arms / single telescopic long arms
- DT/DT = double telescopic short arms / double telescopic long arms
Options
- Available with different portal heights, alternatively in-ground kit
- Set of expansion bolts
- LED-lighting set, flexible with spiral cable, fastening through magnets on posts or vehicle
- Energy set with compressed air and socket-outlet
- Extra control unit for second post
- Large program of extra pads, depending on type of vehicle
- Special colours available on request!
Request for quotation
Technical data
| Lifting capacity, up to | 3,500 kg |
| Stroke length | 1,900 mm |
| Working height | 1,988 - 2,028 mm |
| Lifting / lowering time | ~ 35 sec. |
| Voltage | 3 x 230/400 V - 50 Hz - 20 A |
| Motor | 2 x 2.8 kW |
Arm superstructure
| Lifting pad included in the delivery | F:11027: 88-128 mm CF: 105-215 mm CF-08: 660501 + 777395: 95-250 mm |
| Total height post | 3100 mm |
| Total height incl. portal | 4,060 - 4,420 mm |
| Drive-through width | 2,455 mm |
| Min. height | F-Premium: 88 mm, 78 mm with extra lifting pad 29265 |
| Width between posts | 2,815 mm |
| Total width - outer edges base plates | 3,500 mm |
| Arm length front, min. - max. | F DT: 640-1,175 mm F Premium DT: 555-1,100 mm |
| Arm length rear, min. - max. | F DT: 875 - 1,585 mm F Premium 925 - 1,550 mm |
| Insertion height in swivel arm | F Std: 65 mm F Premium: 53 mm |