Mascot 40 H II

Electro-hydraulic 2-post lift with 4.0 t capacity

Sketches
Brochure
Quotation
Callback

Description

Posts:

  • Asymmetric post installation, vehicles can be positioned far to the rear, for better door-opening angle
  • Very stable, additionally reinforced bent posts 
  • Can be operated from both sides thanks to controls on both columns
  • Direct lowering can be set without lifting from the safety catch
  • Second (slower) lowering speed adjustable
  • Without base frame, therefore free drive-in situation
  • One power pack with low power consumption
  • Carriage with optimized sliding block bearing for low friction
  • Double door-stop mounted on carriage
  • Electrically operated safety ratchet system, no expensive compressed air required
  • Push-button control unit with parking button and alarm signal
  • Adjustable limit switch for top stop and CE-stop, as well as upper protection switch rail
  • Mechanic synchronization via steel cables
  • Post is height adjustable during installation
Arms:
  • Double telescopic arms
  • Capsuled locking system "protected lock"
  • Universal lifting area from small passenger car up to VW T6 long wheelbase
  • Possibility of parallel parking of arms for easier and faster positioning of vehicles
  • Arms can be opened more than 180° for better drive-in situation for lifts installed in 90° angle to the drive lane
  • Low minimum height

Standard colours:

  • Carriage and arms: RAL 3020 – red
  • Posts: RAL 7016 – grey
 

Versions

  • Available with different voltages
  • Universal arm set for different cars
  • DT = double telescopic arms

Options

  • Set of expansion bolts
  • Column extension
  • A large program of lifting pads and adapters
  • Suitable for AUTOPSTENHOJ wheel supports
  • Base plate enlargement for unfavourable soil conditions

    Special colours available on request!
Request for quotation

Technical data

Lifting capacity, up to 4,000 kg
Stroke length 1,870 mm
Working height 1,965-2,044 mm
Lifting / lowering time ~ 40 sec.
Voltage 3x230/400V-50/60Hz-16A
Motor 3.0 kW

Arm superstructure

Lifting pad included in the delivery F: 95 - 174 mm
Total height post 3995 + 225 mm
Drive-through width 2,404 mm
Min. height 95 mm
Width between posts 2,753 mm
Total width - outer edges base plates 3,500 mm
Arm length front, min. - max. F: 605-1,255 mm
Arm length rear, min. - max. F: 740-1,455 mm
Insertion height in swivel arm 55 mm