Please to watch the video.
Maestro 2.55
Electro-mechanical 2-post lift with 5.5 t capacity
Benefits
Smooth running behaviour due to roller-bearing carriage
Smooth running behaviour, low stress on the motors, less power consumption and thus lower costs are guaranteed by the roller-bearing carriage thanks to the low friction in the column.
Unique welded column design
Unique welded column design for outstanding stability, narrower yet stronger than the competition
The cold-rolled spindle
The cold-rolled spindle in combination with the nylon nut ensures maximum safety and long service life.
Strong internal arm locking system
Strong, internal swivel arm locking system protects against dirt and moisture and thus offers high functional safety.
Safety system
A safety system ensures that the lift stops automatically when lowered onto an obstacle.
Electronic synchronisation
During the entire lifting process, the electronic synchronisation is monitored and controlled via an implus comparison of the two columns.
Control unit
Simple and clear design of the control unit. The main control can be combined with an energy set. Both air and 230 V find their place underneath the control unit.
Strong motor
The power of the motor is transmitted to the spindle via a strong V-belt. Hidden under a stylish design, the motor is a guarantee for reliable lifting.
Description
- Symmetric post installation
- Very stable welded posts
- Without base frame
- Two motors
- Cold-rolled spindle
- Nylon nut sets
- Carriage with 6 guiding wheels and lubrication-free roller bearings
- Pushbutton control unit with alarm signal
- Programmable top stop
- Electronic synchronization
- 4 double telescopic arms
- Internal arm locking system
- Low minimum height
Standard colours:
- Arms: red RAL 3020 / posts: grey RAL 7016
Versions
- Available with different voltages
- F = flex pad
Options
- Available with portal or in-ground kit
- LED lighting set
- Power pack
- Set of expansion bolts
- Extra control unit
- Long door stops
- Wheel holders
- A large program of U and flex pads
- Special colours available on request
Technical data
| Lifting capacity, up to | 5,500 kg |
| Stroke length | 1,900 mm |
| Working height | 2,040 - 2,070 mm |
| Lifting / lowering time | ~ 55 sec. |
| Voltage | 3x230/400 V-50Hz - 35/25A |
| Motor | 2 x 2.8 kW |
Arm superstructure
| Total height post | 2908 mm |
| Total height incl. portal | 4,910- 5,270 mm |
| Drive-through width | 2,800 - 3,000 mm |
| Min. height | 140 mm |
| Width between posts | 3,185 - 3,385 mm |
| Total width - outer edges base plates | 3,910 - 4,110 mm |
| Total width - outer edges posts | 3560 - 3760 mm |
| Arm length, min. - max. | 957 - 1,900 mm |