Features & Benefits

Sophisticated technology down to the last detail, practical solutions and features that add value to your AUTOPSTENHOJ product to your advantage.

Entry 1 to 44 of 44
Aluminium guide

Aluminium guide

The guide is made of anodized aluminium and is therefore optimally protected against wear and corrosion, and is clamped into the frame. The head plate can be adjusted, if necessary, which facilitates installation in third-party cassettes.

More details
Synchronisation bar

Synchronisation bar

The optimised synchronisation- and safety is ensured by a KTL coated synchronisation bar which can be adapted to varying piston distances via connecting pieces; the new standard is 1550 or 2600 mm.

More details
Toothed rack

Toothed rack

The toothed rack is used as an alternative synchronisation and safety element in difficult installation situations, where tube installation instead of cassette is the choice, and also offers flexibility in terms of piston distances.

More details
Cassette cover

Cassette cover

The new cassette cover made of an anodised extruded aluminium profile and all-round rubber seal is not only resistant to moisture, but it also safely absorbs the enormous forces that act on the cover during battery removal, for example.

More details
Frame and sub-casing

Frame and sub-casing

The hot-dip galvanized frame for the clamping system of the new guide is bolted to the sub-casing, assembled at the factory. The clamping frame can also be used without the sub-casing for various installation variants like ceiling installation.

More details
Self-supporting installation

Self-supporting installation

Stable and slim suspension for self-supporting installation when supporting on the ground of the cassette isn't possible. The suspension can be retrofitted at any time simply by screwing it to the guide tube; ideal for installation in old cassettes.

More details
Unique welded column design

Unique welded column design

Unique welded column design for outstanding stability, narrower yet stronger than the competition

More details
Smooth running behaviour due to roller-bearing carriage

Smooth running behaviour due to roller-bearing carriage

Smooth running behaviour, low stress on the motors, less power consumption and thus lower costs are guaranteed by the roller-bearing carriage thanks to the low friction in the column.

More details
The cold-rolled spindle

The cold-rolled spindle

The cold-rolled spindle in combination with the nylon nut ensures maximum safety and long service life.

More details
Strong internal arm locking system

Strong internal arm locking system

Strong, internal swivel arm locking system protects against dirt and moisture and thus offers high functional safety.

More details
Safety system

Safety system

A safety system ensures that the lift stops automatically when lowered onto an obstacle.

More details
Electronic synchronisation

Electronic synchronisation

During the entire lifting process, the electronic synchronisation is monitored and controlled via an implus comparison of the two columns.

More details
Control unit

Control unit

Simple and clear design of the control unit. The main control can be combined with an energy set. Both air and 230 V find their place underneath the control unit.

More details
Arm configuration

Arm configuration

Flat enough for sports cars and strong enough to lift vehicles up to 3.5 t.

More details
Optimum surface treatment

Optimum surface treatment

Major 4.40 & 4.55 platforms are sandblasted and powder coated as standard for a long-lasting good look.

More details
Perfect control unit

Perfect control unit

The Major scores with a visually appealing, intuitively operable control unit. All cables and hoses are nicely and safely covered in a flexible but sturdy connecting hose.

More details
Comfortable working height

Comfortable working height

With the Major 4.40 & 4.55, we achieve a particularly comfortable working height of 2.0 m. This ensures ergonomically perfect working even for tall mechanics.

More details
Strong platform profile

Strong platform profile

The Major 4.40 & 4.55 come with the strongest platform profile on the market, thanks to a unique profile edging on the long sides of the platform and a wall thickness of 6 mm.

More details
Pneumatic sliding plate lock

Pneumatic sliding plate lock

More details
Cylinder wheel-free device

Cylinder wheel-free device

The powerful cylinder below the wheel-free device lifts the vehicle to its maximum height of 500mm within a very short time.

More details
Wheel-free device with extension

Wheel-free device with extension

The wheel-free device can lift small vehicles such as the VW Up/Z4 / Z3 as well as standard vehicles such as the T7 short.

More details
Magnetic LED platform lighting

Magnetic LED platform lighting

Maximum flexibility for lighting underneath the picked-up vehicle thanks to the magnetic LED platform lighting.

More details
Stable and galvanised base frame

Stable and galvanised base frame

The galvanised base frame convinces with its high stability and thus ensures optimum scissor guidance over sliding blocks.

More details
Lifting pad versions

Lifting pad versions

Depending on the customer's needs, the right solution is available to quickly compensate height differences, with the CF or CF-08. Or simply and quickly with the F-pad.

More details
Safety ratchet I wheel-free device

Safety ratchet I wheel-free device

The wheel-free device also has a mechanical safety-ratchet for maximum safety.

More details
Safety ratchet

Safety ratchet

The lift comes with a maximum of safety with a mechanical safety ratchet. As soon as the lift stops, the lift automatically moves to the next safety position.

More details
Door stop protection

Door stop protection

The soft door stop protects both the paintwork and the bodywork of the vehicle. This does not affect the door opening angle.

More details
Strong motor

Strong motor

The power of the motor is transmitted to the spindle via a strong V-belt. Hidden under a stylish design, the motor is a guarantee for reliable lifting.

More details
Optimal connection

Optimal connection

Smooth and perfectly synchronised lifting and lowering via devided, flexibly mounted synchronised bearing, completely maintenance- and wear-free.

More details
Strong guide bearing

Strong guide bearing

Strong, corrosion-free aluminium bearings for a permanently attractive appearance, in optimum overall height for maximum stability.

More details
Inversed cylinder - for all inground lifts

Inversed cylinder - for all inground lifts

Hard-chrome plated inversed cylinder with precisely fitting piston guidance via sliding bands, small amount of environmentally friendly hydraulic fluid, almost maintenance-free.

More details
Programmable push button control unit - for all inground lifts

Programmable push button control unit - for all inground lifts

Programmable push-button control with pneumatic emergency lowering, lifting height and CE stop individually adjustable, error code via signal tone sequence.

More details
Steel cassette

Steel cassette

Liquid-tight steel cassette with tightness certificate in many versions for special installation situations; pre-fitting of the lifting unit ex works as optional extra.

More details
Hydraulic pump unit with immersed motor for inground lifts

Hydraulic pump unit with immersed motor for inground lifts

High-quality hydraulic pump unit with immersed motor, low power consumption, efficient oil filtration and pneumatic emergency drain as standard.

More details
Pv Superstructure

Pv Superstructure

Particularly stable repair platforms made of welded profile, alternatively made of solid material, available in various lengths with longitudinally adjustable supports and optionally with xy-slider.

More details
Platform structure ML Combi-Check-in

Platform structure ML Combi-Check-in

Very low platform construction with all-round aluminium planking and LED lighting, reliable automatic wheel stops and low drive-on angle, perfect for sports cars.

More details
Platform structure for 4-ram lifts

Platform structure for 4-ram lifts

High-precision platforms with zinc coated functional surfacesd, distance pieces and sliding plates are fixed by toothed rails made of stainless steel. Can be combined with various wheel aligners.

More details
Air supply for scissor jacks (patented)

Air supply for scissor jacks (patented)

Space-saving and extremely low-wear scissor jack with low overall height, without "knotted" spiral hose, easy to maintain and usable for any platform length.

More details
High precision sliding plates for OEM wheel alignment lifts

High precision sliding plates for OEM wheel alignment lifts

High-precision and smooth moving sliding plates for OEM wheel alignment platforms, with non-skid coating; base plate fixed via toothed list and brush seal to protect against moisture and dirt.

More details
Programmable push button control - Additional features for for 4-ram lifts

Programmable push button control - Additional features for for 4-ram lifts

Additional functions for push button control unit for 4-ram lift: synchronisation control between the lifting units, 3 adjustable height positions, level control for wheel alignment.

More details
Flexible, upgradable, wide product range

Flexible, upgradable, wide product range

Roller brake testers from cars to trucks, in compact design, as a modular system, with 4- 18 t, suitable for many existing foundations.

More details
Modern technology, meets OEM requirements

Modern technology, meets OEM requirements

Updateable circuit board to meet future-proof changes - also from many car manufacturers - can be upgraded at any time with further options.

More details
PC or analogue version

PC or analogue version

Available as PC or analogue version, roller brake testers can be upgraded to a test lane or extended with further options, retrofitting of load cells possible without foundation modification.

More details
High functionality with patented solutions

High functionality with patented solutions

EDOS (Easy Drive Out System) simplifies driving out of the test stand in both directions, automatic all-wheel drive detection, rotation and measurement direction reversal for manual testing of 4x4 vehicles.

More details
Do you have questions?
Contact us
Newsletter registration
More contact options

Please to watch the video.